QDI (Speed Easy) Titanium 2B - PCB version 2.0 BIOS Driver

-Added Support for K6-II+ k6-III+

-The new patched bios supports Hard Disks up to 137 GB.

-Set "Y" as default on exit.

All you need to do is to flash with normal procedure as instructed below.

How to use AWDFLASH.EXE utility:

1. Please press F5 to bypass config.sys and autoexec.bat when booting to DOS.

2. Run utility as follow:

A:> AWDFLASH T2B_V26P.BIN <Enter>

3. On the utility picture, a message "Do you want to save BIOS (Y/N)" will be

displayed. If you want to save the BIOS on the motherboard for referance,

press 'Y'; then, utility will ask you to give path and filename for

backuping ROM BIOS.

4. Furthmore, a message "Are you sure to program (Y/N)" will appear.

To upgrade BIOS, press 'Y'. After the utility finishes the upgrading

procedure, press RESET button or turn power off and on to reboot system.

Warning:

Avoid power-off incidently in upgrading procedure, or system would fail

to reboot!