Model: Titanium IIB - PCB version 2.0
Operating System: (Note: might work with other versions of this os.)
Added Support for K6-II+ k6-III+
The new patched bios supports Hard Disks up to 137 GB.
Set "Y" as default on exit.
All you need to do is to flash with normal procedure as instructed below.
How to use AWDFLASH.EXE utility:
1. Please press F5 to bypass config.sys and autoexec.bat when booting to DOS.
2. Run utility as follow:
A:> AWDFLASH T2B_V26P.BIN <Enter>
3. On the utility picture, a message "Do you want to save BIOS (Y/N)" will be displayed. If you want to save the BIOS on the motherboard for referance, press 'Y'; then, utility will ask you to give path and filename for backing up ROM BIOS.
4. Furthmore, a message "Are you sure to program (Y/N)" will appear.
To upgrade BIOS, press 'Y'. After the utility finishes the upgrading procedure, press RESET button or turn power off and on to reboot